smartLAB hrm W heart rate monitor
Here you will find all important information about the smartLAB hrm W
smartLAB hrm W heart rate monitor
List of apps that work with the smartLAB hrm W.
The smartLAB hrm W supports Bluetooth and ANT+ data transfer technologies. As soon as a receiver and app supports one of these transmission technologies and supports the reception of heart rate with these technologies, the smartLAB hrm W can be connected to the receiving device.
The following apps are familiar with the smartLAB hrm W (as of Feb 2021)
- Decathlon Coach Run & Walk
- Sportractive (Nur Android)
- Runtastic PRO
- MyFitness App
- Elite HRV
- Map my Run
- Wahoo Fitness
- and much more
The contacts of the chest strap must be moistened
Please make sure that the contacts to the skin are a little moist when you put the belt on the body. So that the device also tackles. During your sports activity, the contact by sweating remains moist.
Tip for opening the battery compartment
To perform a battery change, it is recommended to open the battery compartment with a coin. With light pressure, insert the coin into the predetermined slot in the lid and turn in the direction of OPEN. With another small jerk over the arrow length. the lid can now be easily removed.
If the lid cannot be lifted despite the tip above, turn the lid to the left as much as possible and then lift the lid with a sharp knife.
Can you wash the chest strap?
Yes. Please use only water without chemicals when washing.
Which battery is required for the smartLAB hrm W and how long does it last?
You need a button cell battery 2032 3 V. The service life is almost 1 year with normal use (3 times per week a 2 hours).
Can the device be paired with systems such as Apple Watch, Polar, TomTom, Nyon Bosch or other systems with Bluetooth?
The smartLAB hrm W works with the Bluetooth 4.0 standard protocol. Pairing to many devices is possible if these devices support a heart rate monitor with Bluetooth. Please check your device if it supports the Bluetooth 4.0 standard protocol as well as heart rate devices with Bluetooth.
Which APP for iOS do I have to download so that I can measure and display my heart rate?
You can download any app that supports Bluetooth heart rate devices. There are several apps on the market, including Runkeeper, Runtastic, Wahoo Fitness and Myfitnesspal. Our fitmefit move app will soon also support the display of heart rate.
The following link lists some apps that are compatible with the smartLAB hrm W: httpwww.smartLAB.org
With which smartphones and tablets or mobile operating systems is the device compatible?
The device is compatible with the following mobile devices:
- iPhone from iPhone 4s
- iPad from iPad 2
- Android from version 4.3 and above
- Windows Phone
In general, the smartLAB hrm W is compatible with all devices that support either ANT+ and/or min. Bluetooth 4.0.
My device won't pair with my mobile device via bluetooth.
The new Bluetooth 4.0 does not pair like the usual standard Bluetooth. Read our blog for more important information on this topic.
How do I wear the smartLAB hrm W belt correctly?
When wearing the smartLAB hrm W, make sure that the left and right contacts are correctly attached to the belt/body. If this is not the case, only short signals are sent, after which no data will be sent. Pay attention to the mark next to the contact points on the back of the sensor. The R should be on the right side of the body, the L on the left side.
Why is the data transfer not working properly / no longer?
For a working data transmission, it is important that the sensor is correctly attached to the body with the belt. Care must be taken to ensure that the correct side of the sensor is on the side of the body. On the back of the sensor, an R and an L are counter at the contact points.
Make sure that the R is attached to the right side of the body and the L to the left side of the body.
If the data transfer suddenly stops working properly or no longer works at all, remove the sensor from the belt, rotate it and reattach it. Or you can simply rotate the entire belt so that R and L are correctly attached.
Now try to enable data transfer again during the training.
Why is the smartLAB hrm W not or not correctly displayed in my Bluetooth overview? Why is there no connection?
The smartLAB products are not connected via the Bluetooth settings of the mobile device, but directly via the respective app. If you are using an app that supports the connection of the respective smartLAB product, go to the device connection or device settings of the app and pair the app and smartLAB device via this way. If a connection is not possible, please contact our support team.
An overview of various apps that works with our smartLAB products can be found here.
IMPORTANT: There is a possibility that a request will appear in the app as to whether the device should be paired with the smartphone. Cancel this request because this type of pairing can interfere with the data exchange. If you have agreed to pair, please disconnect the device using the Bluetooth settings of the smartphone!
Can I pair the device with a Bluetooth and ANT + receiver at the same time?
The device simultaneously sends the Bluetooth and ANT signals, so that you can use 2 empers (app on mobile device with Bluetooth and sports watch with ANT+) at the same time.
Does the device also calculate calories?
No. This is calculated via the app or the paired device. The device only sends heart rate data.
Can this device be coupled with systems such as Elite Real tour, bkool, Tacx Trainer, xplova e5, bryton, sportiva, Trek or other systems with ANT +?
The smartLAB hrm W works with all devices on the market that support ANT+ heart rate devices. Check that your device supports an ANT+ heart rate monitor.
Can the heart rate monitor be paired with Garmin devices? Is the heart rate displayed on the Garmin device?
The smartLAB hrm W works with all Garmin devices that support ANT+ and Bluetooth heart rate devices. Check if your Garmin device supports a heart rate monitor and ANT+ or Bluetooth.
How does a heart rate monitor work?
A heart rate device is worn on the chest and the heart rates are measured. When you start recording on the APP, the data is saved until it is stopped. The data is then transferred to the portal. Calories are also calculated here. You can view the data under "Training" in the portal.
I wear a very large size. Will the belt still fit me?
The belt can be worn up to a diameter of 95 cm.