hLine App –
Connection to smartLAB products
Here you will find important information about connecting your smartLAB product to the hLine app
Connection to smartLAB products
smartLAB pressure W: Notes on connecting to the hLine app.
Perform the following process to properly bind the smartLAB pressure W to the app. If the connection was done manually, no data transfer can take place.
It is best to do the following:
- Download the hLine app from the Google Play Store or Apple Store
- Launch the app and set all important profile data
- Now take the smartLAB pressure W. It is important that it is switched off
- Press the Start button for a long time. The Bluetooth sign starts flashing. Make sure the app is in the foreground during pairing.
- The serial number is displayed on the screen. Add the serial number
- Done appears on the smartLAB pressure W display as soon as the pairing is successful.
- The device is set up by the app with date and time, as well as other profile data
- You can get started!
Important: If the series number was not accidentally added during the scan, we recommend restarting the app and running the process again. Once the serial number has been rejected, it will no longer be recognized, even if it has been entered manually.
Important note for Android users with Bluetooth Smart transmission
With the latest Android versions (usually from Android 6.0) there are connection problems with Bluetooth Smart. There seems to be a general problem with data transfer from Bluetooth Smart to Android, which we have no influence on.
It is often the case that data transfer of the smartLAB product to an Android smartphone from 6.0 indicates problems.
Turning on the GPS function solves the problem of data transmission. Once you turn on Bluetooth and GPS, from our experience, data transfer works without any problems.
How can I connect my smartLAB device to the app?
Pairing the devices to the app works automatically. Once you unpack and power on the device, be sure to have the app open and in the foreground. After a few seconds (the duration may vary from device to device), the serial number of the device appears on the screen. Confirm yes to pair the device. At the bottom of the app, you can see that pairing has started. The message that the device has been set will then appear.
Important: If the series number was not accidentally added during the scan, we recommend restarting the app and running the process again. Once the serial number has been rejected, it will no longer be recognized, even if it has been entered manually.